LG dishwashers are known for their efficiency and reliability, but like any appliance, they can encounter issues from time to time. When your LG dishwasher displays an error code, it’s essential to understand what it means and how to resolve the problem.
If you get an OE error code, your LG dishwasher is likely having drainage problems. To troubleshoot LG dishwasher drainage problems, inspect the filter, ensuring it’s debris-free and the drain hose isn’t blocked.
In this comprehensive guide, we will explore how to troubleshoot LG dishwasher error codes. Whether it’s an OE, LE, CE, HE, FE, E1, PF, tE, or IE error code, we’ve got you covered with expert advice.
Error Codes on LG Dishwasher
Whether you’re a seasoned user or a new owner, here are some LG dishwasher error codes to know about and their troubleshooting tips.
OE Error Code: Drainage Problem
The OE error code on your LG dishwasher signifies a drainage problem. This issue is a result of clogged food particles or improper installation. To resolve it:
- First, check if there are any blockages in the drain hose.
- Inspect the dishwasher’s filter and ensure it’s free from debris.
- Select the “CANCEL & DRAIN” option on the control panel to initiate a drain cycle. If the issue persists, consider seeking a professional appliance repair service in Toronto to address the problem.
LE and CE Error Codes: Motor Operation Issues
The LE and CE error codes indicate problems with the dishwasher’s motor. To address these error codes:
- Turn off the dishwasher by pressing the power button.
- Unplug the dishwasher for 10 seconds.
- Plug the dishwasher back in or switch on the circuit breaker.
- Press the power button to turn the dishwasher on.
- Start a new wash cycle to check if you successfully resolved the error.
Related Article: Troubleshooting Tips for Common Microwave Oven Issues
HE Error Code: Heating Problem
The HE error code points to a heating issue related to the dishwasher’s heater. If your dishwasher can’t heat water or if the water becomes too hot, this error code will appear. To resolve it:
- Turn off the dishwasher by pressing the power button.
- Unplug the dishwasher for 10 seconds.
- Plug it back in.
- Press the power button to turn the dishwasher on.
- Start a fresh wash cycle to verify if you’ve eliminated the error.
FE Error Code: Excess Water and Drain Pump Activation
The FE error code signifies an excess of water in the dishwasher, leading to an immediate activation of the drain pump. To address this issue:
- Turn off the dishwasher by pressing the power button.
- Unplug the dishwasher for 10 seconds.
- Plug it back in.
- Press the POWER button to turn on the dishwasher.
- Initiate a new wash cycle.
E1 Error Code: Leakage Detected
The E1 error code suggests a possible leak within the dishwasher. Leaks can result from incorrect installation, improper detergent use, or incorrect loading of dishes. To rectify this error:
- Inspect the drain hose for its positioning. If it is lower than the base of your LG dishwasher, excessive leakage could occur, causing an E1 error.
- Ensure the drain hose’s end is positioned above 10 feet from the bottom of the dishwasher to prevent siphoning.
- Examine the drain hose for any fractures or damages that may lead to water leakage. Replace it if necessary.
PF Error Code: Power Failure
The PF error code alerts you to a power failure. In the event of a power outage, your dishwasher secures itself. When power is restored, press and hold any button on the dishwasher’s control panel for 10 seconds to clear the display and restart the cycle.
tE Error Code: Thermal Error
The tE error code indicates a thermal error, typically occurring when the water temperature exceeds 194 degrees Fahrenheit. This error code may also appear if the thermistor is malfunctioning. In such cases, you may need to replace the thermistor.
IE or 1E Error Code: Water Fill and Drain Issues
An IE or 1E error code on your LG dishwasher suggests that after filling the water for 10 minutes, the water level didn’t rise sufficiently. It also suggests that the water didn’t drain correctly into the dishwasher. To resolve this error:
- Ensure that the water supply valve is open.
- Check the water supply line for kinks or clogs.
- Cut the water supply line and run water into a bucket to test the flow.
- If the issue persists, consider replacing the water inlet valve.
Related Article: Appliance Safety Tips: Preventing Electrical Hazards in Your Home
Keep Your Routine Going with Expert Appliance Repairs
Understanding LG dishwasher error codes is essential for effective troubleshooting. Following the steps outlined for each error code, you can address common issues that may arise during the dishwasher’s operation. However, if any of these solutions do not seem to work, it is advisable to seek professional repair services to tackle the issue.
At Prime Appliance Repairs, our team of experts is ready to assist you in resolving any LG dishwasher errors and ensuring your dishwasher operates efficiently. Don’t hesitate to contact us at 1-647-490-6155 for professional and reliable appliance repair services.
